Register  |  Login  |  My Profile  |  Inbox  |  My Notifications  |  Member List  |  Search  |  FAQ  |  Log Out

Iron On Velcro?

Logged in as: Guest
  Printable Version
All Forums >> [Sewing] >> Home Decor & Crafts >> Iron On Velcro? Page: [1]
Message << Older Topic   Newer Topic >>
Iron On Velcro? - 3/8/2018 2:58:24 PM   


Posts: 169
Joined: 2/1/2011
Status: offline
Has any one used Iron-on Velcro? I need to replace Velcro on outdoor furniture tabs. I quickly put on some of the sticky Velcro & it did not holds the tabs together. I know I will need to test, but if anyone has used it & has some experience with it, would appreciate info. I will need a lot of the velcro & hate to make a big purchase & find out it does not "bond" to fabric long term. TIA
Post #: 1
RE: Iron On Velcro? - 3/8/2018 6:09:27 PM   


Posts: 1754
Joined: 2/1/2011
Status: offline
Would the fabric you want to attach to this be able to withstand the iron temperature to secure this? I'm skeptical that velcro can do that without melting. Hmm


Dana, mom of two young men

(in reply to valdiva)
Post #: 2
RE: Iron On Velcro? - 3/8/2018 6:26:13 PM   


Posts: 169
Joined: 2/1/2011
Status: offline
Supposedly position the Velcro to fabric & turn the fabric over. Iron/steam from the fabric side, rather than putting an iron directly to the Velcro. The tabs are two layers of fabric & then the heart would need to be "hot" enough" to fuse the Velcro to the chair cushion tabs.

(in reply to DDinDFW)
Post #: 3
RE: Iron On Velcro? - 3/9/2018 8:30:01 AM   


Posts: 1183
Joined: 2/3/2011
Status: offline
There may be some good glues out there. I am sure someone here will come up with something.
Good Luck


(in reply to valdiva)
Post #: 4
RE: Iron On Velcro? - 3/9/2018 8:39:04 PM   


Posts: 3791
Joined: 2/2/2011
Status: offline
I've never tried iron on Velcro but have never had success with the stick on Velcro as it couldn't withstand the pulling needed to separate the pieces. Is it absolutely impossible to stitch Velcro to these items?


Happy Sewing, Carol

(in reply to ssstitches)
Post #: 5
RE: Iron On Velcro? - 3/11/2018 9:38:22 AM   


Posts: 169
Joined: 2/1/2011
Status: offline
Thanks for all the insight. Based on the location of the furniture tabs, I just can't imagine getting a sewing machine close enough to the edges to securely sew the Velcro in place. Once JoAnns has a decent coupon, I am going to try the iron on & if that does not hold, will use the E6000 glue to secure the Velcro. At this point I don't have anything to loose - just floppy furniture cushions..LOL!

(in reply to caaguirre)
Post #: 6
RE: Iron On Velcro? - 3/11/2018 2:02:06 PM   

Posts: 11846
Joined: 2/1/2011
From: Calgary Area of Alberta
Status: offline
Years ago our office went through a big reno - they used heavy duty upholstery Velcro had to be stick on... but the regular stuff stick on does not hold used it on doggy coats... didn't last so sewed it on... go find an upholstery store maybe they will sell you some Velcro that would be best choice.


Shirley - Mom to Dickens (PuppyWuppy now known as Dicky Wicky)and Doyle (baby) and Baxter, Bella, Pistol, Cowboy, ChiChi at Rainbow Bridge
I sew on Janome 8000, 10001, 11000se, 12000, 350e, 300e, Janome 234d and Babylock Imagine

(in reply to valdiva)
Post #: 7
RE: Iron On Velcro? - 3/12/2018 11:32:38 AM   
Linda S.


Posts: 6041
Joined: 2/2/2011
Status: offline
I've had a terrible time trying to get Velcro to stay on. The sticky kind will gum up your machine...there is
quite a few comments on the internet about it. And it doesn't last long. The iron on kind doesn't stay put
for long either.

The sew-on kind is a better idea but it can be hard to get your stitching down, without a lot of skipped stitches.
The thread coming from the machine gets caught on the hook side of the Velcro. If one sews just on the very
lengthwise edge, there is a flat area without hooks or loops where you can stitch, but it's a very narrow area.
And of course, when I tried sewing across the bottom of several strips of Velcro, I had skipped stitches all
across....especially on the hook side.

I'm not sure what the answer is, unless as Shirley suggests you can find some professional grade hook and loop
tape. After I'd already sweat bullets trying to get this Velcro sewn on, I thought of trying to use a clear nylon
thread...the kind that looks like clear, fine fishing line. Maybe that could pass through without getting caught
up on the hook and loop tape?

I wish you luck! Will you come back to tell us what you figured out?

(in reply to ShirleyCalgary)
Post #: 8
Page:   [1]
All Forums >> [Sewing] >> Home Decor & Crafts >> Iron On Velcro? Page: [1]
Jump to:

New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts

© 2018 F+W All Rights Reserved. | Privacy Policy